Block count chart for 12 common wall sizes
With generic 16-inch-long × 6-inch-high face units, one buried course and 10% cutting allowance, the counts below round every course and the final order upward. Heights are exposed blockwork, with caps excluded. These are quantity examples, not approved wall designs.
Use your actual installed module, embedment and layout for an order. Special units and full-pallet purchasing are separate. Changing a height across a course boundary can add a whole row.
| Wall run | 2 ft exposed | 3 ft exposed | 4 ft exposed |
|---|---|---|---|
| 10 ft | 44 blocks | 62 blocks | 80 blocks |
| 20 ft | 83 blocks | 116 blocks | 149 blocks |
| 30 ft | 127 blocks | 178 blocks | 228 blocks |
| 40 ft | 165 blocks | 231 blocks | 297 blocks |
Choose installed block dimensions
Select a reference preset or enter the actual length, height and depth. The selector changes dimensions only; packaging, caps, core fill, base and drainage assumptions remain yours to verify. The full manufacturer table and catalog notes are kept in the block-size guide.
How many retaining wall blocks do I need?
A face-area shortcut divides total wall area by the area of one block. That can be a useful early check, but it does not round the ends of each course or a partial top course. Course counting is a better starting point for an order list. This tool rounds the run of each course, rounds the exposed courses, adds your buried courses, and finally applies waste.
If a block is tapered, split-faced, or part of a modular pattern, use its effective installed coverage. Do not use the widest decorative face as a module length unless the manufacturer specifies that measurement. Enter special corners, half units and end units separately in your supplier schedule.
Order blocks = ceil(ceil(length ÷ module length) × (ceil(height ÷ module height) + buried courses) × (1 + waste/100))
Retaining wall block waste and pallet counts
Waste is an allowance for cuts, handling damage and uncertain takeoff details. Five, ten and fifteen percent are convenient planning choices, not measured product loss rates. The actual allowance depends on the layout, whether cuts can be reused, and your supplier’s returns policy.
The pallet count rounds the order quantity up to a whole pallet using the number of units you enter. The starting 75 units is illustrative, not a standard package across brands. Buying whole pallets can give you more units than the displayed unit takeoff. Check the product listing before approving delivery.
Example: how many blocks for a 20-foot wall?
With a 20-foot run, 3 feet of exposed height, 16-inch-long × 6-inch-high units, one buried course and 10% allowance, order 116 blocks (105 net). The run takes 15 units per course, and six visible courses plus one buried course produce the 105-unit net count.
At 37 inches of exposed height, order 132 blocks (120 net). The partial height requires seven full exposed courses; adding the buried course gives eight courses × 15 units. This is why a one-inch height change can add a complete course, not because the calculator applies an area-only shortcut.
How many retaining wall blocks per square foot?
A generic 16 × 6 inch installed face needs about 1.5 blocks per square foot of wall face. An 18 × 8 inch installed face covers 1 ft², giving 1 block per square foot. Use the installed face length and height; block depth does not determine face coverage.
This is a rough area check. It excludes buried courses, cutting allowance, caps and rounding at the ends or top of the wall. Use the course-based calculator above for an order. For tapered faces or mixed-size patterns, use the manufacturer’s stated installed coverage.
Face area (ft²) = installed face length (in) × course height (in) ÷ 144 Blocks per ft² = 144 ÷ (installed face length (in) × course height (in))
Frequently asked questions
Does the block chart include a buried course?
Yes. Each chart quantity includes one entered buried course and 10% cutting allowance. Replace that assumption with the embedment in your actual wall details.
Does the pallet count change the block cost?
No. The budget prices individual required units. If only full pallets are sold, compare the cost of the actual purchased quantity separately.
How many blocks for a 50-foot, 3-foot-tall wall?
Order 293 blocks for a 50 ft wall with 3 ft of exposed height using the default 16 × 6 in face, one buried course and 10% allowance. The run rounds up to 38 units per course. Six exposed courses plus one buried course give 7 courses and 266 net units before the allowance.
How deep should the first course be buried?
Allan Block’s commercial gravity-wall instructions specify at least 6 in (150 mm) of buried block and refer to the approved plan for the required depth. Its residential step-up detail separately allows about 1 in of burial per foot of wall height beyond the base-rock depth and calls for a full buried block at each step.
How wide and deep should the base trench be?
Allan Block’s commercial gravity detail specifies a trench at least 24 in wide and 12 in deep, including at least 6 in of compacted wall rock. Its residential step-up detail lists 18 in of width and 4 in of base rock for walls under 4 ft, with extra trench depth for the buried block.
Does a 4-foot block wall need geogrid?
A 4 ft height alone cannot determine whether the wall needs geogrid. VERSA-LOK says soil, slopes and loads can lower the unreinforced height limit, and taller walls typically need engineering. Model IRC R105.2 exempts walls up to 4 ft measured from footing bottom to wall top without surcharge. See the geogrid guide and permit guide.
References and scope
Arithmetic and worked examples are explained on our methodology page. The cited sources provide product, pricing or local approval context; they do not approve a generic wall. References checked November 3, 2026.
- Allan Block: residential basic installation
- Allan Block: reinforcement installation
- Allan Block: residential retaining wall manual
- Allan Block: gravity wall constructionAccessed 3 November 2026.
- Allan Block: stepping up the baseAccessed 3 November 2026.
- VERSA-LOK: Standard Design & Installation Guidelines.Accessed 9 November 2026.
- International Code Council: IRC R105.2 permit exemptionsAccessed 3 November 2026.
Read the estimating and engineering limits, or send a correction.